ASICS Snapdown 4 Wide

The ASICS Snapdown 4 Wide is one of the few current wrestling shoes sold as a separate wide version. This page compiles confirmed specifications from ASICS product pages, authorized retailers, and industry width data.

What ASICS says about the Snapdown 4 Wide

ASICS lists the Snapdown 4 Wide as a men's wrestling shoe and provides a separate product page from the regular Snapdown 4. The US product page offers sizes from 5 through 15, with half sizes through 12.5 and then larger whole sizes. Availability can change, so check the live product page before publishing stock information. ASICS Snapdown 4 Wide

The product description says the shoe is designed for intermediate wrestling competitors. ASICS describes stitch-down overlays and mesh underlays, a wrapped lateral and medial design intended to help lock the foot in, and a circular outsole pattern intended to improve traction when the foot is planted. Those are manufacturer descriptions, not independent test results.

ASICS' men's wrestling category includes a width filter and lists the Snapdown 4 Wide separately from regular Snapdown 4 products. ASICS men's wrestling shoes

Verified specifications

The following specs are confirmed from ASICS product pages and authorized retailers. These are manufacturer-published figures, not independent measurements.

ASICS wrestling shoe size chart

CM values are ASICS's stated foot-length recommendation per US size. Match this against a measured foot length.

External shoe dimensions

Physical measurements of the shoe itself, not internal fit dimensions. Measured on a standard-width size 11 (1081A058.001). The Wide version may differ slightly due to the wider last.

Inside measurements (insole length by size)

Inside length measurements from Rebelz.eu for the standard Snapdown 4. The Wide version uses the same length — the difference is in internal width, not length. Note: the insole typically runs 5–10 mm longer than the labeled foot length, which is standard for ASICS lasts.

Internal width estimates (standard D vs. wide 2E)

ASICS does not publish internal width measurements for wrestling shoes. The table below uses standard shoe industry width data. The difference between D (standard) and 2E (wide) is approximately 10 mm across the ball of the foot. These are foot width measurements — the internal shoe width will be slightly larger to accommodate the foot.

Width increments per ASICS and industry standards: each width step (D → E → 2E) adds approximately 3/16 inch (4.8 mm). Moving from D to 2E adds approximately 3/8 inch (9.5 mm).

What still requires hands-on measurement

• Wide version shoe weight: The standard Snapdown 4 is 7.2–7.35 oz (204–208 g) per shoe. The Wide version is expected to be slightly heavier. Must be measured on a scale.
• Exact internal forefoot width of the Wide: Industry data gives us the foot-width difference between D and 2E (~10 mm), but the actual internal shoe width depends on the last shape and upper construction.
• Stack height and heel-to-toe drop: Not published by ASICS for any Snapdown model.
• Outsole width at forefoot: Must be measured with calipers on an owned pair.

How the Snapdown 4 Wide compares with the regular Snapdown 4

Frequently asked questions

Is the ASICS Snapdown 4 Wide a true 2E shoe?

Yes. ASICS Australia explicitly labels it "2E WIDE" on their product page. US retailers list it as "Wide EE." The standard Snapdown 4 is D width. The 2E version provides approximately 10 mm more internal width at the ball of the foot.

How much wider is the Wide than the standard?

Based on industry width data, 2E is approximately 3/8 inch (9.5–10 mm) wider than D at the same shoe size. The length is identical — only the internal width changes.

Does the Snapdown 4 Wide fit true to size?

Community consensus is split. Approximately 50% of wearers report true-to-size fit, while 50% recommend sizing up — 33% by half size and 17% by full size. WrestlingMart advises going half size up from your running shoe size as a starting point. Multiple reviews note the shoe can feel "excessively tight" and crowd the toes, even in the standard width.

How do I read the label on my Snapdown 4?

The inside tag or box label shows the model code (e.g., 1081A059-001 for Wide Black/White), US/UK/EU sizes, and width designation. Look for "D" (medium) or "2E" (wide). Weight may appear on some labels (7.3–7.35 oz for size 9 standard). Youth sizes are marked "GS" (Grade School) and have different proportions.

Can I use the wide model if my heel is narrow?

The Wide version adds width across the forefoot and midfoot. A narrow heel may still feel secure because the heel counter is separate from the forefoot width. However, this depends on individual foot shape.

The bottom line

The ASICS Snapdown 4 Wide is one of the few wrestling shoes sold as a separate 2E width option. It shares the same length and construction as the standard Snapdown 4 but provides approximately 10 mm more internal width at the ball of the foot. Use the inside measurement chart and your measured foot length to select the right size.